The 100KW Kaplan Turbine that was ordered by a distinguished Brazilian customer had been completed in June 2021.side,
Entrance width: 2m-8.5m
Installation angle: 60°-90°
Center distance of trash rack: 20mm-200mm
Working width of tooth bar: 1.7m-8.2m
Vertical installation height: 3m-20m
Plane steel trash racks are installed at the inlets of the diversion channel of hydropower stations and the inlets and tail gates of pumped-storage power stations. They are used to block the sinking wood, weeds, branches and other solid debris carried by the water flow. Do not enter the diversion channel to ensure that the gate and turbine equipment are not damaged, and the normal operation of the equipment is ensured.
The trash rack can be arranged in a straight line or a semicircular line on the plane, and can be erected or inclined on the vertical plane, depending on the nature, the amount of dirt, the use requirements and the cleaning method. The inlets of high-head dam-type hydropower stations are generally upright semi-circular, and the inlet gates, hydraulic tunnels and water pipelines are mostly straight lines.
The trash rack can be arranged in a straight line or a semicircular line on the plane, and can be erected or inclined on the vertical plane, depending on the nature, the amount of dirt, the use requirements and the cleaning method. The inlets of high-head dam-type hydropower stations are generally upright semi-circular, and the inlet gates, hydraulic tunnels and water pipelines are mostly straight lines.
